玻璃体切割术是目前临床上常见的眼科手术之一，其应用广泛，且具有良好的治疗效果，但术后仍会出现各种并发症，眼压升高便是其中常见的一种。玻璃体切割术后眼压升高的病因复杂多样，术前原发病的不同、术中处理方式的差异以及术后并发症均可引起眼压升高，根据不同的病因可以选用更合适的治疗方法。早期的眼压升高较易控制，主要采用药物及激光治疗，晚期眼压升高导致继发性青光眼则相对复杂，以手术治疗为主。该文主要对玻璃体切割术后高眼压的原因分析及治疗进展进行综述。
Pars plana vitrectomy is one of the common ophthalmic surgeries in clinic practice currently, which is widely used with good therapeutic effect. However, various complications may still occur after operation. Elevated intraocular pressure is one of common complications. The causes of postoperative ocular hypertension are complex and diverse. Elevated intraocular pressure could be caused by different preoperative primary diseases, intraoperative management methods,and postoperative complication. More appropriate treatment methods can be selected based on different causes. Early elevated intraocular pressure iseasier to control and is mainly treated with medicine and laser. Late elevated intraocular pressure leads to secondary glaucoma, which is relatively complex and mainly treated with surgery. This review mainly states causes and treatment progress of high intraocular pressure after vitrectomy.
玻璃体替代物是玻璃体切割术后的必需品，用于填充玻璃体腔，恢复玻璃体的支撑视网膜、屈光和细胞屏障等功能。严重眼外伤及复杂视网膜脱离引起的视网膜/脉络膜脱离，如选用传统的玻璃体替代物(如硅油)填充，部分患者会出现硅油依赖眼或眼球萎缩，眼球难以保全。折叠式人工玻璃体球囊(foldable capsular vitreous body,FCVB)是我国独立研发的挽救眼球的人工玻璃体，属于国际首创，可以精细模拟自然玻璃体的结构，恢复玻璃体的部分功能。目前临床研究证实FCVB不仅可以有效避免硅油的并发症，还可以维持后房空间，缓慢恢复睫状体的功能，从而治疗硅油依赖眼，阻止眼球进一步萎缩。该文综述了FCVB的研究背景、结构特点、临床应用和拓展研究进展。
Vitreous substitutes are necessary after vitrectomy to fill the vitreous cavity and restore the vitreous to support retinal, refractive, and cellular barrier functions. Severe ocular trauma-induced retinal/choroidal detachment filled with traditional vitreous substitutes (e.g., silicone oil) can lead to silicone oil-dependent eyes and ocular atrophy in some patients, making it difficult to preserve the eye. Foldable capsular vitreous body (FCVB) is an artificial vitreous body independently developed in China to save the eye, which is the first of its kind in the world and can finely simulate the structure of natural vitreous body and restore some of the functions of vitreous body. It has been clinically proven that it can not only effectively avoid the complications of silicone oil, but also maintain the posterior chamber space and slowly restore the function of the ciliary body, thus treating silicone oil-dependent eyes and preventing further atrophy of the eye. This article reviews the research background, structural features, clinical applications and extended studies of FCVB.
玻璃体视网膜疾病并发白内障患者行玻璃体切割术联合超声乳化白内障摘除术，即前后节联合手术，是高效的手术方式，而后囊膜破裂(posterior capsular rupture,PCR)是超声乳化白内障摘除术的术中并发症之一，能够及时、有效地处理PCR，稳定、安全地植入人工晶状体(intraocular lens,IOL)，对于顺利完成后段手术，减少术后并发症十分重要。本文将对前后段联合手术中后囊膜破裂的术中处理、以及IOL光学部夹持固定法植入IOL的手术技术要点进行总结。
Combined surgery of pars plana vitrectomy (PPV) and phacoemulsification is an effective and safe way for management of retinal diseases complicated with cataract. Posterior capsular rupture (PCR) is one of the common intraoperative complications of phacoemulsification, and it is thus very important to deal with it promptly and efficiently, and ensure the subsequent procedures of intraocular lens (IOL) implantation as well as PPV. We will summarize the key points of the surgical technique for management of PCR and capture of IOL optic during combined surgery.
随着微创玻璃体切除术(pars plana vitrectomy，PPV)的广泛开展和手术技术的提高，患者对手术后视觉质量的要求越来越高。白内障是PPV术后最常见并发症，而具有玻璃体切除史的白内障患者屈光变异大，预测难度高。本文综述了生物测量误差、人工晶状体屈光力计算公式选择以及有效晶状体位置预测等影响有玻璃体切除手术史的白内障患者术后屈光误差的主要因素，旨在为降低这一类特殊人群白内障术后屈光误差提供参考。
With the widespread application of minimally invasive vitrectomy and the improvement of surgical techniques, the demands of patients for better postoperative visual quality are increasing. Cataract is the most common complication after vitrectomy, whereas the refractive outcomes of cataract patients with prior vitrectomy are viable and difficult to predict. In this paper, the main factors affecting postoperative refractive error of cataract patients with a history of vitrectomy, such as biometric error, selection of intraocular lens calculation formulas and prediction of effective lens position, were reviewed in order to provide reference for reducing postoperative refractive error of this special group of cataract patients.
目的：探讨标准操作程序在玻璃体腔内注药术护理中的应用效果。方法：选择2018年9至12月中山大学中山眼科中心眼底专科门诊504例玻璃体腔内注药术患者作为研究对象，对护理人力资源的整合、患者等待手术时间、患者和家属的满意度、医护人员满意度进行评价。结果：标准操作程序后明确护士岗位职责，护士操作水平和综合能力有效提升，患者手术等待时间由原来的预约2周缩短为2 d。患者和家属的满意度分别由92.0%和91.0%提高到98.5%和97.0%。医护人员满意度的评价由95%提到至98.4%。结论：玻璃体腔内注药术标准操作程序不仅提升了工作效率，更提升了患者和家属、医务人员的满意度，规范化的标准操作程序是玻璃体腔内注药的安全保障。
Objective: To investigate the effect of standard operation procedure in the intravitreal injection. Methods: A total of 504 patients visiting the fundus clinics of our hospital from September to December 2018 were selected in this study. The integration of nursing human resources, patient waiting time, patient and family satisfaction,and medical staff satisfaction were evaluated. Results: The nurses’ job responsibilities were clarified, and the nurses’ operation level and comprehensive ability were improved. The patients’ waiting time for surgery was shortened from 2 weeks to 2 days. Patient and family satisfaction increased from 92.0% and 91.0% to 98.5% and 97.0%, respectively. The evaluation of the satisfaction of medical staff was elevated from 95% to 98.4%.Conclusion: The standard operation procedure of intravitreal injection not only improves the work efficiency, but also significantly increases the satisfaction of patients and their families and medical staffs. Therefore, the standard operation procedure can guarantee the safety of intravitreal injection.
为在眼科日间手术模式下既能满足玻璃体视网膜术后体位需求，又能合理利用有限空间，本研究团队在原有的眼科日间病房座椅的基础上，增加玻璃体手术后体位护理等功能，发明了一种护理座椅[专利号：国家实用新型专利(ZL 2017 2 0942404. 1)]。该座椅采用钢喷塑(或不锈钢)、木板、海绵和人造革皮等材料，其结构主要包括座椅的主体部分、俯卧台、杂物篮、收纳架、输液杆套筒等部分。其制作材料简单，操作方便，安全使用，既能保证临床体位护理需求，又能节省空间，便于病房环境管理。
To meet the needs of the postoperative position nursing after pars plana vitrectomy in the day surgery mode,this research team has designed a nursing chair [patent number: National Uutility Model Patent (ZL 201720942404. 1)] based on the original chair of ophthalmic day ward, adding the functions of postvitreous nursing and so on. The seat is made from steel spray plastic (or stainless steel), wood, sponge and artificial leather, and the structure mainly consists of the main body, the countertop for prone position, the junk basket, the storage rack, and the infusion rod sleeve. The seat can be made by simple materials. The seat is easy to operate and safe to use, which can not only meet the needs of clinical body position nursing care, but also save the ward’ space and facilitate the environmental management of the ward.
目的：探索用细胞块制备试剂盒对眼内玻璃体液微量细胞制备细胞块的成功率，苏木素-伊红(hematoxylin-eosin，HE)染色效果及技术要点。方法：收集中山大学中山眼科中心临床病理科2020年9月至2021年1月由临床送检的25例玻璃体液(含玻璃体切割液)，应用细胞块制备试剂盒制备细胞块后，常规固定、脱水、包埋、切片，随后进行HE染色，观察染色效果。结果：25例玻璃体细胞蜡块制作成功率达到100%，制片后HE染色效果好，背景干净，细胞形态清晰，核质对比分明。结论：应用细胞块制备试剂盒能将眼内玻璃体液微量细胞制成蜡块，极大提高了标本的利用率，为后续的病理研究提供丰富的材料。
Objective: To explore the effect and technical key points of the cell block preparation kit for collecting a few cells in ocular vitreous humor. Methods: A total of 25 cases of vitreous humor (including vitrectomy fluid) were collected from Zhongshan Ophthalmic Center, Sun Yat-sen University from September 2020 to January 2021.Cell block preparation kit was used to prepare cell blocks, which were routinely fixed, dehydrated, embedded,sectioned, and then hematoxylin-eosin (HE) stained. Results: The success rate of 25 cases of vitreous cell paraffinblocks reached 100%, and the morphology of the cells was clear with clean background and shape contrast of nucleus and plasma in HE staining. Conclusion: The cell block preparation kit can make the cells of intraocular vitreous humor into paraffin blocks, which greatly improves the utilization rate of specimens and is conducive to providing abundant materials for pathological studies.
目的：探讨折叠式人工玻璃体球囊(foldable capsular vitreous body，FCVB)植入术的护理配合。方法：对2018年6月至12月接受FCVB植入术的33例患者的术中护理配合进行回顾性分析和总结。结果：33例患者的手术均能顺利进行，术后裂隙灯显微镜检查示折叠式人工玻璃体球囊位置均居中；患者均未见球囊排斥、交感性眼炎及其他明显手术并发症。结论：FCVB是全球首创的革命性产品，手术前充分的术前准备，系统规范化的手术巡回配合，是保证手术顺利完成的关键。
Objective: To explore the nursing cooperation of foldable capsular vitreous body implantation. Methods: The intraoperative nursing cooperation of 33 patients who received the operation from June to December 2018 was retrospectively analyzed and summarized. Results: All the 33 patients underwent successfully, and silt lamp microscopy showed that the position of foldable capsular vitreous body was in the center. No foldable capsular vitreous body rejections, sympathetic ophthalmitis or other obvious surgical complications were observed in all cases. Conclusion: Foldable capsular vitreous body is a global innovative product. Adequate preoperative preparation before surgery and systematic and standardized surgical tour coordination are the keys to thesuccessful completion of surgery.
目的：了解玻璃体切除硅油填充术后患者(face-down positioning，FDP)依从性的相关影响因素。方法：采用随机抽样研究的方法，选取2018年1月至2019年12月于无锡市人民医院眼科行玻璃体切除硅油填充术后的患者100例，采用问卷调查对一般资料、FDP可能发生的反应和依从性进行调查。采用SPSS 19.0进行统计分析。结果：患者性别、对疾病的重视程度与FDP的依从性有显著差异(P<0.05)，但家庭支持系统与FDP的依从性差异无统计学意义(P>0.05)。患者术后第1天对FDP依从性的主要影响因素依次为呼吸不畅(84%)、睡眠不佳(78%)、肩颈部不适(10%)；术后第3天的主要影响因素依次为呼吸不畅(66%)、腰酸背痛(50%)、睡眠不佳(39%)；术后第5天的主要影响因素依次为肢体麻木(70%)、腰酸背痛(87%)、睡眠不佳(30%)、肩颈部不适(18%)以及肘关节疼痛(10%)。结论：影响患者依从性的主要因素主要有性别、对疾病的自我重视程度以及FDP引起的不适症状。需加强对高危因素的识别，不同病情时段给予征对性的宣教和指导，以提高患者对FDP的依从性。
Objective: To investigate the influencing factors of compliance of patients with silicone oil tamponade after vitrectomy. Methods: A total of 100 patients with silicone oil tamponade after vitrectomy in Wuxi People’s Hospital of Jiangsu Province from January 2018 to December 2019 were selected by random sampling method.The general information, possible reaction, and compliance of face-down positioning (FDP) were investigated by questionnaire. SPSS 19.0 was used for statistical analysis. Results: There were significant differences in patients’gender, attention to disease and FDP compliance (P<0.05), but there was no significant difference between family support system and FDP (P>0.05). The main influencing factors of FDP compliance were dyspnea (84%), poor sleep (78%), the discomfort of shoulder and neck (10%); on the third day after operation, the main influencing factors were dyspnea (66%), low back pain (50%) and poor sleep (39%); on the fifth day, the main influencing factors were numbness of the limbs (70%), low back pain (87%) and poor sleep (30%), the discomfort of shoulder and neck (18%) and elbow pain (10%). Conclusion: The main factors that affect the compliance of patients are gender, self-awareness of the disease and discomfort caused by FDP. It is necessary to strengthen the identification of high-risk factors, and give symptomatic education and guidance at different stages of illness, to improve the compliance of patients to FDP.
目的：探讨品管圈在提高玻璃体切除术后患者俯卧位执行率中的应用效果。方法：成立品管圈活动小组，选定提高玻璃体切除术后患者俯卧位执行率作为活动主题，运用品管圈工具和方法，对现状进行分析，找出影响因素，制定相应的措施并组织实施，比较品管圈活动前后玻璃体切除术后患者俯卧位执行率情况。结果：玻璃体切除术后患者俯卧位执行率由活动前的64.70%提高到95.83%。结论：运用品管圈能显著提高玻璃体切除术后患者俯卧位执行率，值得临床推广。
Objective: To explore the effect of quality control circle on improving the prone position execution rate of patients after vitrectomy. Methods: Establish quality control circle activity group, select improving the prone position execution rate of patients after vitrectomy as the activity theme, use quality control circle tools and methods to analyze the status quo, find out the influencing factors, formulate corresponding measures and implement them, and compare the prone position execution rate of patients before and after quality control circle activity. Results: The prone position execution rate of patients after vitrectomy increased from 64.70% to 95.83%.Conclusion: The application of quality control circle can significantly improve the prone position implementation rate of patients after vitrectomy, which is worthy of clinical promotion.
